I’ve long been an avid fan of Badassworkroom and the company’s custom made steel chastity devices. I couldn’t be more satisfied with the two custom devices I’ve ordered from them so far. So, when I discovered they now offer a line of colorful resin devices, obviously “inspired” by KINK3D’s Cobra chastity cages, I had to try one. These cages, dubbed the HF-001 model, are available in five sizes. I chose the D1 size for this review. As far as I know, these are molded resin devices, not 3D-printed, but these devices are of high quality, smooth without any seams, and I love all the colorful options.
The last time I reviewed a device “inspired” by KINK3D’s Cobra chastity cages, I heard from a few guys who disapproved. One said he felt I had done a disservice to KINK3D by reviewing a device, clearly copying their design. I understand that opinion, and it isn’t wrong. However, as I’ve explained before, I try to review a variety of devices at different price points as I can imagine some guys simply can’t invest $155 to $185 in the devices KINK3D offers, but would like to get a similar product. And at the time I published that review, the made in China “knock-off” devices sold for between $9.99 and $16.99 depending on what seller someone chose. That device was truly a “knock-off” in that the manufacturer not only copied the design and manufactured the devices with 3D-print technology, they also copied the KINK3D nomenclature, using “Cobra” in the device’s name. Sure, they added two additional words, calling it the Cobra Male Chastity Lock, but just like the fake Holy Trainers that even had “Holy Trainer” stamped on them, I’m guessing they hoped to convince potential buyers in the same way they were getting the real deal at bargain basement prices.
While you can look at Badassworkroom’s HF-001 and see the obvious similarities with the Cobra, the company isn’t engaging in unethical marketing by representing the device as a Cobra. They aren’t trying to fool anyone. And it isn’t 3D-printed. Is that enough for the HF-001 to fall more into the inspired than the copied category? That’s your call to make. My take is if you want to buy an original KINK3D, made in the USA high-quality 3D-printed device and you’re willing to spend the $155 to $185, I applaud you. And if you like the style but can’t justify the significant investment and a similar product at a lower price that performs the same function satisfies you, I see no shame in it. I find it hard to believe copied devices take much business from the original creators. Someone who wants an original Cobra and can afford the cost isn’t likely to buy a copied version. And those who buy copied versions I doubt would have ever bought an original anyway. Using me as an example, I prefer steel devices and while I don’t doubt that KINK3D products are terrific and worth every penny, I’m in the camp of those who wouldn’t consider paying $155 to $185 to get one. So, to each his own.
HF-001 Chastity Device Specifications
Compared to the KINK3D device, available in eight sizes, the Badassworkroom offers the HF-001 in five sizes. I chose the D1, which is comparable to the Cobra N+ in size. The D-1 is a size smaller than the first Cobra-like device I tried and reviewed. While that one fit the length of my flaccid peen, if you read the review, I had an annoying issue with it. When my penis shrunk, as they do with the male organ’s constant state of contracting and expanding, mine would get stuck at about the midpoint of the cage and absent an actual attempted erection, the tip would never return to the end of the cage. This made peeing even more problematic than usual with chastity devices. So, I hoped a shorter cage would solve the issue. More on that bit later.
I admit the thing that first attracted me to the HF-001 was the availability of the four additional vibrant color options for those of us who like something other than basic black. I chose the purple color and was very pleased with my choice when the device arrived. Now let’s look at the specifications.
Besides the cage and “MagicLocker” the HF-001 comes with four different base ring sizes from 43mm to 51mm. The 43mm fits me perfectly. I think it’s an unusually wonderful variety of sizes where one should fit most guys.
Not only do you get the set of four base rings, you can also choose between “arc” rings (ergonomic) or standard round rings. Unfortunately, you can’t mix and match. You must take all four using the same option. I chose the round rings which do the job for me. I had an unpleasant experience with an ergonomic ring once, so I choose to stay away from them. Not to say others don’t love them. Before leaving the base ring topic, you can also get a custom-sized stainless steel ring with this device at an extra charge if you’re so inclined.
Comfort and Feel of the HF-001
As with all plastic chastity devices, the HF-001 is pleasingly light-weight. The cage and the base rings are smooth as glass inside and out, so I haven’t had even the hint of any chafing. The color is spectactularly vibrant and they color the resin itself so it doesn’t rub off or stain your skin. I put mine on September 1 and haven’t removed it since. It’s that comfortable. But alas, going one size smaller on cage length didn’t cure the same annoying sticking problem I experienced with the first Cobra-like device. With the HF-001, when my peen retracts, the head sticks about three-quarters of an inch from the end of the cage and that makes the issue even worse while urinating than I had with the longer cage. It positions my urethral opening right behind a bar at the top of the cage and even sitting, pee sprays like crazy. So, I have to use a Q-Tip to poke and prod to set things right every time I visit the bathroom. This issue results from two things. Like all Cobra-style devices (including the original I’ve now learned), the cage is (by design) not perfectly round. Instead, it’s slightly oval-shaped, from side to side. The other problem is me. My flaccid penis is chubby and I have a good bit of excess skin below the glans left over from circumcision. These two aspects of my organ don’t play well with the oval shape and that causes the sticking problem at the choke point. Other than that, I have no other problems with the fit and feel. It’s a comfortable device to wear.
Safety Considerations While Wearing the HF-001
Like any Cobra-style device, the design of the HF-001 is simple. There is a cage, base ring, lock, and two tabs on the cage that slip into a pair of sockets on the base ring to add stability. That makes the two components fit tightly together so there is no wobble. You must exercise a little care to avoid pinching when mating the cage to the base ring. It’s a simple ball-trap device, so the usual cautions apply. Choosing the proper size base ring is important. Choosing a base ring size that is too small can cause significant issues, including the risks associated with compromising your circulation. As a rule of thumb, skin discoloration or skin temperature of the scrotum that feels noticeably cooler than normal body temperature are indications of reduced circulation.
Hygiene Considerations When Wearing the HF-001
Thanks to the cage-type open style, I give the HF-001 high marks in the ease of cleaning department. It’s simple to keep the contents clean with a handheld shower head. I’ve worn mine for sixteen days without having to remove it for cleaning. Expect to sit to pee to avoid making a mess, and especially if you have the “sticking problem” I do, don’t even think about trying to pee while standing.
Final Thoughts
First, a word about “security” which, if you’re a regular reader of this website, you know by now is a relative term when discussing ball-trap chastity devices. The HF-001 does what the manufacturer designed it to do. It doesn’t fall off accidentally, but if you want to remove it while it’s locked on, it isn’t hard to do. The same thing is true of any device made using this design. So, if you want to compare it to the original KINK3D version, the HF-001 is no better and no worse. But it may not be the best choice for those with little or no willpower because there are other devices available that require more effort to escape from. That said, for those of us ready and willing to stay locked when required without cheating, this is an acceptably secure device.
I’m impressed by the overall quality of this device and love the color options. The darn sticking problem is my only real complaint. But as they say, if at first you don’t succeed, try again. I like this device well enough that I’ve already ordered another, this time the E1, the model with the shortest cage. Hopefully, with no extra length in the cage at all, the tip of my unruly peen will stay put at the end of the cage where it belongs. One way or the other, the E1 is what I plan to wear while flying when I visit Europe later this year. Several months ago, I bought one of the plastic locking plugs for the trip that I’ve mentioned that slides into the MagicLocker receiver and you then secure it with a plastic numbered lock. That means all plastic, baby, and it should speed me through security with no risk of having an embarrassing show and tell discussion in a small, locked room with TSA.
At $50, I think Badassworkroom has fairly priced the HF-001 given the high quality. If this device interests you, it’s available directly from the Badassworkroom official website, and also from the Badassworkroom Etsy store. Pro tip. If you get one, order from their Etsy store and you’ll get free shipping. Orders at the website incur shipping costs and you might as well save a few bucks.
Disclaimer: This review represents my own honest opinions. I purchased this device at the full retail price using my own funds, and I have no affiliation with Badassworkroom other than being a satisfied customer.
Comments
please describe the negative experience with the curved baserinh.
what is the tube to ring distance for the flat ring?
Author
I probably should have been more clear. The “ergonomic” ring I had the bad experience with wasn’t curved like those described here. It was an “egg shaped” rather than circular steel ring. After about five minutes after I put it on, it felt like my testicles were being ripped off. Part of the problem was as you observed, a change in the gap. But the shape didn’t work at all for me, so I now stick to round rings as my personal preference. Here I was only explaining why I chose to go with round rings but didn’t mean to imply there is anything wrong with the curved ones.
What are you wearing currently? The e1 smallest model? Thanks
Author
Yes, since the beginning of Locktober, I’m wearing the E1, the smallest model. And I love it. It’s comfortable, easy to clean in the shower, and the shorter cage solved the problem I had with the D1.