While it is beginning to sound (and feel) a little redundant, it’s time for another episode of honor chastity revisted. So, in this post, I’ll also cover some other things.
Back to Honor Chastity. Again.
While I had felt cautiously optimistic that Lucie might allow me to finish Chastity 90 locked, it was not to be. After eighteen days this time, she surprised me this morning by telling me to unlock for 72 hours. And she surprised me again with a week-long self-teasing schedule for me to do while she is away on a two-week summer vacation that she left on this afternoon.
The schedule has a different assignment for each day of the week, and I will repeat it next week. That, according to Lucie, should keep my arousal peaking until she returns from vacation. And she didn’t want me to feel locked and forgotten when I’m re-locked in a few days.
I know from experience while self-locking that the effectiveness of self-teasing can feel less than optimum. But this feels different since Lucie created the assignments and, frankly, they seem quite interesting.
Other than the requirement to perform edges on two different days each week, none of the other tasks are things she has given me to do before. And, I appreciate she spent the time and energy to create something to help maintain my focus while she is away. Lucie had already told me not to expect our usual daily interaction while she was on vacation, so I’d had been dreading a Lucie-less fortnight. Maybe the assignment schedule will help the time pass more quickly.
Update on My Kink3D Cobra N Device Experience
After spending another eighteen days in my Kink3D Cobra N chastity device, I feel compelled to update my experience with it. Love. Love. Love it. This may be my favorite long-term chastity device ever.
As a die-hard stainless steel device fan since my salad days with chastity devices, I admit I once felt pretty dismissive of plastic cages. Some of the great resin cages I’ve tried out for reviews had slowly chipped away at my disdain for plastic devices, but I give full credit to Kink3D’s 3D-printed nylon device for winning me over. I still love the weight and feel of my custom-made stainless-steel devices, and I’ll wear those again sometimes. But the last eighteen days convinced me that the Cobra might be the best long-term device option currently available.
There are three things I demand from a chastity device for long-term wear: fit, comfort, and ease of maintaining acceptable hygiene. The Cobra earned high marks in all three areas during my 18-day locked period.
First, the device felt completely comfortable. Usually when I’m wearing any device, especially when I first wake up in the morning, I feel some slight discomfort where the base ring runs beneath my balls. I attribute this to the changes the testicles undergo when a penis owner becomes sexually aroused.
Researchers tell us the testicles increase in size (not quite double) and move closer to the base of the penis to prepare for ejaculation when desire becomes arousal. So, when a guy wakes up with morning wood (or the attempt at morning wood for those of us wearing a chastity device) the conditions are ripe for these changes to occur. The increased size narrows the “ball gap” and the barrier the ring provides that keeps the testicles from rising closer to the base of the penis combine to produce the uncomfortable feeling of tightness.
While I can’t say it is painful, I find it uncomfortable enough to find it annoying. So, usually, the first thing I do every morning when locked is to step into the shower and spray hot water on my balls with the handheld until the heat forces them to descend further from my body to maintain optimum temperature. Not once during the past eighteen days did I experience this discomfort while wearing the Cobra. I can’t explain why, but my morning shower routine became unnecessary. And that’s only one reason I found the Cobra so incredibly comfortable to wear.
Now, let’s talk about hygiene. By design, the Cobra cage is an open-style cage. It comes very close to how open my favorite stainless-steel devices are. That allows me to clean the cage and contents thoroughly using soap and my handheld shower head. And when I removed the cage after eighteen days, I detected none of the funky odor you get with chastity cages that are difficult to clean while wearing them. Also, the skin of my penis was in pristine condition with no dryness or other issues.
While the Kink3D “airlock” performed flawlessly, I found it nearly impossible to thread the “shackle” end of the plastic lock through the locking housing of the device after mating the cage and base ring. The plastic is very stiff and it resists bending to slip through the small hole at the end of the housing. When I searched the web for a solution I found only a video that suggested threading the plastic lock through backwards instead of the way intended. That was easier, but it leaves the printed numbers facing down instead of up where the keyholder can read them. I felt sure Lucie would not be impressed with that.
After some experimentation, I stumbled on a very simple, and easy solution. I’ll make a video instruction when I have time since I’m not sure how clearly I can explain it using only text. But, you thread the free end of the plastic lock along the airlock as usual. It lays in a small channel and the tip goes through a tiny hole at the far end of the plastic pin. Then you join the cage with the base ring, but only the tab portion at the top of the cage with the hole through it that fits into the center of the base ring receiver. Tilt the nose of the cage up slightly to keep the tabs on each side away from where they snap into the base ring. Then, clamping that center tab and the base ring receiver together with the thumb and index finger of your right hand, insert just the tip of the locking pin into the lock opening and thread the end of the plastic lock through the hole in the center tab with your left hand fingers. You can then easily grab the free end of the lock and pull it through the partially open receiver housing to where it needs to be. Then, snap the cage and base ring together properly and push the plastic locking pin completely into the receiver and you’re ready to lock. It’s incredibly easy to do this way while trying to do it the way many videos on the webs show it is nearly impossible. It isn’t so difficult when you’re holding the device in your hand like they do on the videos. But using that method when you are wearing the device is a different matter.
Male Call Addendum - Cherry Keeper Ball Gap Question
After publishing the “Mall Call” post last time, I received another question from a blog follower about Cherry Keeper chastity devices and I didn’t want to delay answering it. Nikos wrote to say he has decided he wants a Cherry Keeper device. But since he has “high and tight” balls, he is concerned about the width of the “ball gap” and wanted to know whether the manufacturer offers options for a device with the wider gap.
Thanks for the question, Nikos. You called the device you are considering “Cherry Picker” but I am assuming you meant “Cherry Keeper” since you referred to the review I posted on that device. I know some international manufacturers have copied the Cherry Keeper design and are now selling counterfeit devices, and one such manufacturer in China calls its device “Cherry Picker.” So, I can’t be sure whether you spoke of the authentic device designed by Josielynn Jewell that she sells through her Shapeways.com Josielynn’s Body Jewelry shop, or one of the copied devices. Nevertheless, what I can tell you would apply, regardless.
The design of the Cherry Keeper (and devices copying the original design) along with 3D-printing technology doesn’t allow for adjustments to the ball gap width. 3D-printing is not cheap. Profit comes from mass producing items based on a single design as it would be cost prohibitive to offer customization to individuals down to the level of ball gap width of a chastity device. Not to say there aren’t some variances of ball gap width. But the Cherry Keeper (and copiers of the design) rely on the same method as a company like Kink3D to offer narrower or wider ball gaps. Ball gap is a function of base ring size, which isn’t a perfect method.
The authentic Cherry Keeper now comes in about three dozen different models, all called “Cherry Keeper.” So, I just selected a representative model, the Cherry Keeper Standard. Here is a list of the ball gap measurements by base ring size.
Ball Gap Spacing (static):
36mm ring: 10.9 mm
38mm ring: 11.6 mm
40mm ring: 12.5 mm
42mm ring: 13.6 mm
44mm ring: 15.0 mm
46mm ring: 16.5 mm
48mm ring: 18.2 mm
50mm ring: 20.0mm
Source: Josielynn’s Body Jewelry
Here is why this isn’t a perfect method. Say you know a 40mm base ring is the perfect size for you, but you feel a 12.5 mm gap is too narrow for your physiology. To get a wider gap, you would have to try a larger than perfect-sized ring. Maybe the 42mm or 44mm, or something even larger.
The problem is, if you go too much larger than what is your optimum size, you may experience problems with a testicle popping out of the base ring when wearing the device. But if you truly need a wider gap, using a bigger ring than you actually want is the only solution.
My ideal base ring size is 42mm and so with the Cherry Keeper I get a 13.6 mm ball gap. That’s roughly 9/16 inch using imperial units of measurement. While that is a bit over 1/2 inch, I still find it works for me with the Cherry Keeper, even though I usually have ball-slippage issues with devices having a gap that wide. I too have high and tight balls and a 3/8 inch (9.525 mm) gap works perfectly for me.
Since I can’t imagine anyone has balls that are higher and tighter than mine, I’m curious how you know you need a wider gap than the usual set by the manufacturer? That’s because ball gap is impossible to measure, meaning measuring ourselves the way we measure length and girth of the penis and circumference of a circle around the penis base and behind the scrotum for base ring sizing. Personal experience, I imagine. Like I once tried a device with a 1/4 inch gap and within minutes, it felt like the base ring was crushing my balls. And I’ve tried several devices with a 1/2 inch gap and one of my testicles always popped out of the ring. After trying multiple devices with 3/8 inch gaps, I learned that was my ideal ball gap measurement.
Anyway, I’d suggest visiting the Josielynn’s Body Jewelry website, https://www.shapeways.com/shops/josielynn-s-body-jewellery and reviewing the specifications for the specific model you are interested in. If you’re considering a knock-off, then just take a look at the website and choose the model that looks most similar to what you’re thinking of getting. Those who copy designs from other manufacturers almost always buy and then reverse engineer an original they intend to copy. So, I have high confidence the measurements will be exactly the same. Then, if you believe you know your ideal ball gap, try a base ring size that’s closest to the gap width you need. The Cherry Keeper base rings are relatively cheap (around $20), so maybe try two or three to see what works best.